WORKSAFE Victoria says Jalor Tools has pled guilty to two workplace safety charges relating to a router tool in an incident which led to the death of a worker.
27/01/2010 |
THE AUSTRALIAN Steel Institute says all three ASI National Occupational Health and Safety (OH&S) Awards winners for 2009 were presented awards at the Australian Steel Convention in Sydney.
10/12/2009 |
LINCOLN Electric has launched two new premium push-pull welding guns models, the Panther and Cougar for demanding aluminium fabrication and production welding environments.
20/11/2009 |
LINCOLN Electric says it has expanded its popular POWER MIG wire feeder/welder line with the new 216 model, with a wide amperage range of 30 to 250 amps.
18/11/2009 |
WORKSAFE Victoria says Phyl Hilton from Toyota’s Altona Plant has taken out the Award for Health and Safety Representative of the Year in its 2009 Awards.
03/11/2009 |
A PLUMBER’S van blew up at Chelsea Heights, Melbourne, after welding and cutting gas ignited.
23/10/2009 |
THE AUSTRALIAN Steel Institute (ASI) has been awarded a grant by Workcover NSW to help improve steel handling safety.
23/10/2009 |
A TOOLMAKER at Toyota’s Altona Plant is a finalist in the 2009 WorkSafe Victoria Awards in the category of Health and Safety Representative of the Year.
20/10/2009 |
SUTTON Tools’ health and safety committee has been named a finalist in the WorkSafe Victoria Awards 2009.
14/10/2009 |
WORKSAFE Victoria has released information on preventing injuries and fatalities around manual lathes.
28/09/2009 |
SHEET metal products manufacturer Stratco has been convicted and fined in the SA Industrial Court after a worker injured his thumb in a fabricating machine.
14/09/2009 |
WORKSAFE WA says it is targeting the powder coating process for inspection.
26/08/2009 |
FRANK Schrever says metal manufacturers can ensure their metal lathes are safe with a combination of hard and soft safety controls.
05/08/2009 |
WORKSAFE Victoria has issued safety guidelines for workers casting lead alloys in the manufacturing industry, warning against excessive exposure to lead.
28/07/2009 |
THE AUSTRALIAN Steel Institute (ASI) has opened entries for its 2009 ASI National Occupational Health and Safety Excellence Awards until 31 July.
26/06/2009 |
WORKSAFE Victoria has made available the industry standard for safe design, fabrication, transport and erection of structural steel for buildings.
15/06/2009 |
PRO-VISUAL Publishing is sending out free copies of its 2009/10 edition of the Metal Manufacturing Industry Guide to Safety chart.
09/06/2009 |
AUSTRALIAN Welding Solutions says high-profile disasters often serve to highlight the devastating consequences when poor welding practices and procedures compromise the integrity of entire structures.
05/05/2009 |
A 31-year old welder has been seriously burned after a fuel tank he was welding at a Department of Sustainability and Environment Depot exploded.
22/04/2009 |
WORKSAFE Victoria says workers should not fit saw blades to angle grinders to use as cutting tools.
22/04/2009 |